| Place the Infrared Sauna Wrap on a flat surface, such as the bed or floor. |
| Put the control box on a flat surface, such as a table,Connect the 3 blanket connection to control box's Five-core socket. |
| Then connect the power cord to the main power socket. |
| Turn the main power switch on at the back of the control box. There are a sound and screen are flash. The device has not started working yet. |
| Press the ''POWER'' key to start setting the temperature and the timer. |
| Press ''TIME '' to set the working time from 5-60min. For each time pressed, the time will increase or decrease by 5 minutes. Recommend time is 30min |
| Press ''TEMPERATURE'' to set the working temperature. the temperature will increase or decrease by 1° Centigrade for each time is pressed. Recommend temperature is 60degree |
| Then press ''SELECT'' key to choose the zone .There are red dots on the bottom of screen . |
| Press ''START'' key. The right bottom of screen will flash and temperature are change, showing that heating has started. |
| When the heating timer counts down to ‘0’, The beep will sound 5second . showing the heating has finished. |
After using it, please cut off the power button at the before of the control box,Turn the main power switch off at the back of the control box and take off power cord .
finally,pull the plug out from the power source. Attention :Please do not take off the 3 blanket connection before close the power . |
| If you need to stop the session at any time, just press the ‘Start’ key. |
| Wipe the sweat on the surface of the thermal blanket with a wet towel ,and dry it by laying it on a flat bed or table for 30min . |
| Fold the blanket and store it in a dry place. |
| If people want to use it more than one time in a day, wipe surface of the thermal blanket with a wet towel after using it , then please wait 30 minutes ,preferably 1 hour. |
